


Jeff Rowland
Jeff Rowland Model 735 - Amplificatore finale mono NEW
Quantità:
Model 735
Finale di potenza mono da 370W RMS su 8 ohm. Circuiti stampati a norme MIL con substrato ceramico. Alimentazione ad alta efficienza switching. 1 Ingresso bilanciato XLR, 2 uscite in parallelo. Trigger 12V. Pulsante di standby illuminato sul frontale. Chassis interamente in alluminio estratto dal pieno.
Finale di potenza mono da 370W RMS su 8 ohm. Circuiti stampati a norme MIL con substrato ceramico. Alimentazione ad alta efficienza switching. 1 Ingresso bilanciato XLR, 2 uscite in parallelo. Trigger 12V. Pulsante di standby illuminato sul frontale. Chassis interamente in alluminio estratto dal pieno.
Prezzo Cad.
Specifiche
Output Power 330 watts @ 8 ohms / 650 watts @ 4 ohms
Frequency Response 5 Hz – 90 kHz, – 3 dB
S/N Ratio 95 dB, ref. 1.0 watt @ 8 ohm load
Output Noise <55 µv, 20 Hz – 20 kHz, unweighted
Input Impedance 40k ohms
THD + Noise <0.001% from 2.0 kHz – 20 kHz, gradually increasing below 2khz due to amorphous core input transformer characteristics
Damping Factor >500, 20 Hz – 20 kHz
Overall Gain / Bal. or Unbal. 26 dB
Common Mode Rejection Ratio > 90 dB, 20 Hz – 20 kHz
Absolute Phase Non-inverting Pin 2 Positive
Inputs Balanced (XLR)
Outputs 2 pair parallel binding posts
Power Consumption Idle 85 watts/VA, power factor corrected at all power levels
Power Consumption Standby 0.3 watt
Amplifier Weight 54 lbs. / 24.5 kg (each)
Amplifier Shipping Weight 64 lbs. / 29 kg (each)
Amplifier Dimensions (h/w/d) 5.75” x 15.5” x 16.25” / 146mm x 394mm x 413mm
Output Power 330 watts @ 8 ohms / 650 watts @ 4 ohms
Frequency Response 5 Hz – 90 kHz, – 3 dB
S/N Ratio 95 dB, ref. 1.0 watt @ 8 ohm load
Output Noise <55 µv, 20 Hz – 20 kHz, unweighted
Input Impedance 40k ohms
THD + Noise <0.001% from 2.0 kHz – 20 kHz, gradually increasing below 2khz due to amorphous core input transformer characteristics
Damping Factor >500, 20 Hz – 20 kHz
Overall Gain / Bal. or Unbal. 26 dB
Common Mode Rejection Ratio > 90 dB, 20 Hz – 20 kHz
Absolute Phase Non-inverting Pin 2 Positive
Inputs Balanced (XLR)
Outputs 2 pair parallel binding posts
Power Consumption Idle 85 watts/VA, power factor corrected at all power levels
Power Consumption Standby 0.3 watt
Amplifier Weight 54 lbs. / 24.5 kg (each)
Amplifier Shipping Weight 64 lbs. / 29 kg (each)
Amplifier Dimensions (h/w/d) 5.75” x 15.5” x 16.25” / 146mm x 394mm x 413mm